Free Shipping. No Sales Tax.
Availability:
Estimated Arrival: Between Dec 04 and Dec 06.
Estimated Handling Time: Product Ships in 1-2 Business Days
Shipping Time: Please Allow 2-6 Business Days for Delivery
Shipping & Returns: Free Shipping. All The Time.
Drolet Legend III Wood Stove With Blower DB03073
Recommended heating area: 900 - 2,300 ft²
RECOMMENDED AREA MAP BY CLIMATE ZONE
Size: 24 1/4" W X 32 3/8" D X 32 5/8" H
Maximum log length: 20"
Average particulate emission rate: 0.95 g/h
Combining respect for the environment and performance, the Legend III is ideal for heating spaces up to 2,300 ft². This non-catalytic appliance is among the most ecological on the market with a particle emission rate of 0.95 g/h. Its maximum power of 90,000 BTU/h will keep you warm all winter long. Its firebox is specifically designed for loading of logs over depth.
Included: blower, cast iron legs with ash drawer, top air deflector, ceramic glass, ash lip, air damper
▪ Up to 10 hours burn time
▪ Up to 20" logs
▪ 3.3 ft³ firebox
▪ Heavy duty 5/16" steel top reinforced with C-Cast heat shield
▪ EPA certified
▪ Proudly made in Canada
▪ Limited lifetime warranty
▪ Certified for mobile home and alcove installation
Any installation must be done according to the data and drawings detailed in the owner’s manual.
Resources
Wood stove manual | Safety notifications & general information
Installation and Operation Requirements
Specs
| Fuel type | Dry cordwood (16" recommended) |
| Recommended heating area(9) | 900 - 2,300 ft² |
| Overall firebox volume | 3.3 ft³ |
| EPA loading volume | 2.67 ft³ |
| Maximum burn time(9) | 10 h |
| Maximum heat output-dry cordwood(4) | 90,000 BTU/h (26.4 kW) |
| Minimum overall heat output rate(4) (5) | 15,841 BTU/h (4.64 kW) |
| Maximum overall heat output rate(4) (5) | 57,041 BTU/h (16.72 kW) |
| Average overall efficiency-dry cordwood (HHV)(5) (6) | 71.1 % |
| Average overall efficiency-dry cordwood (LHV)(5) (7) | 76.6 % |
| Optimum efficiency(1) (2) | 78 % |
| Optimum heat transfer efficiency(8) | 74 % |
| Average particulate emission rate(3) | 0.95 g/h |
| Average CO(10) | 61.3 g/h |
| Size | Extra Large |
| Alcove installation approved | Yes |
| Mobile home approved | Yes, with fresh air intake |
| Certified according to applicable standards | By an accredited laboratory (CAN/USA) |
| Overall dimension (Width) | 24 1/4" |
| Overall dimension (Height) | 32 5/8" |
| Overall dimension (Depth) | 32 3/8" |
| Premium quality blower included (CFM) | 100 CFM included |
| Combustion technology | Non-catalytic |
| Stainless-steel secondary-air system | Yes |
| Flue outlet diameter | 6" |
| Distance-center of the flue outlet to back unit | 7 1/2" |
| Distance-center of the flue outlet to side unit | 12 1/8" |
| Recommended chimney diameter | 6" |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height | 12' |
| Door type | Single, glass with cast iron frame |
| Door opening size (Width) | 16" |
| Door opening size (Height) | 10 3/4" |
| Glass type | Ceramic glass |
| Glass surface - W x H | 14 5/8" x 11 3/4" |
| Steel thickness-body | 3/16" |
| Steel thickness-top | 5/16" |
| Firebox size (Width) | 19" |
| Firebox size (Height) | 14 1/8" |
| Firebox size (Depth) | 21" |
| Log positioning | Loading over depth |
| Maximum log length | 20" |
| Firebox lined with refractory bricks | Yes |
| Baffle type | High quality vermiculite |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA Standard (emissions) | EPA |
| Canadian Standard (safety) | ULC S627 |
| USA Standard (safety) | UL 1482, UL 737 |
| Warranty | Limited lifetime |
| Shipping weight | 436 lb (198 kg) |
| Clearances to combustibles* |
Canada
United-States
|
| Single wall pipeDouble wall pipeSingle wall pipeDouble wall pipe | |
| Clearance - Side wall | 12"12"12"12" |
|---|---|
| Clearance - Corner | 10"8"10"8" |
| Clearance - Back wall | 14 1/2"7 1/2"14 1/2"7 1/2" |
| Clearance - Base of the unit to ceiling** | 84"84"84"84" |
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
- 1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
- 2. Optimum overall efficiency at a specific burn rate (LHV).
- 3. This appliance is officially tested and certified by an independent agency.
- 4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
- 5. As measured per CSA B415.1-10 stack loss method.
- 6. Higher Heating Value of the fuel.
- 7. Lower Heating Value of the fuel.
- 8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
- 9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
- 10. Carbon monoxyde.
About Drolet
With the expansion of its operations, F.-X. Drolet acquired a lot in 1907 on which he built a 90,000 square foot metallurgical plant. The building has two parts: the mechanical workshop on one side, and the foundry and forge on the other. Much better located, this new plant is fully equipped with modern machinery. Shortly after moving, the sons of F.-X. Drolet join the company.
In 1988, Drolet was a pioneer in the development of low emission products. The HT-2000 is the first EPA / CSA certified appliance and has literally become a legend in the wood burning world! Over the next few years, a whole series of "HT" products were developed and met with huge success.
Over the years, environmental standards are tightened more and more to reduce the emissions of fine particles caused by the combustion of wood-burning appliances. Just as innovative as in its beginnings, Drolet is ahead of this wave of change and successfully re-certifies its appliances long before the deadline. It was these changes in standards that led to the creation of the HT-3000, which succeeded the legendary HT-2000.
Shipping
ORDER CONFIRMATION
As soon as your order is placed, you will receive an order confirmation e-mail. This confirms your order has been received in our system and your credit card is authorized for purchase. As soon as we receive your order, we begin processing to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will reach out to you via e-mail to confirm if you'd like to keep your order or cancel for a full refund. If your item(s) are available for immediate shipment, we will process the charges and submit the order for shipment.
ORDER SHIPMENT
Please reference your product page specific lead times. After shipment, items will arrive in 2-7 business days.
Some models are custom made, and can take as long as 4-5 weeks to ship depending on the model and series. Please contact customer service before ordering if delivery time is a concern of yours.
Certain items due to high demand and low supply can only be placed on back order at specific times. Please contact customer service to hear about any items availability.
Please contact us for rush shipping rates and options. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within four business days of your order, feel free to follow up with us at info@truehomeoasis.com.
Large items that ship via freight (not UPS or Fedex) require a signature upon delivery. You will receive a call from the shipping company to arrange a time and day for delivery that works for you.
PRODUCT QUALITY GUARANTEE
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should REFUSE the package, and make note of it on the delivery receipt. If your item(s) do arrived damaged, please contact us immediately and send photos to info@truehomeoasis.com . We will process an insurance claim on your behalf and happily work with you to resolve the issue and refund or replace your order.
CANCELLATIONS & REFUNDS
Generally, most of the items we carry can be returned within 30 days of receipt in new condition and unopened.
Returned products must be sent back with their original packaging and have all of the parts and components that they came with. Please contact the manufacturer for any warranty issues.
Please document (photograph) any damages upon receiving the item and report these damages to the delivery carrier if product was sent by LTL or freight (not by UPS, Fedex, USPS, etc).
Some items may be subject to a 15% restocking fee. Customer is responsible for return shipping and original shipping cost, even if the item was "free shipping". Any damages to products may void the return.
Returns must be accompanied with an RMA number. Please contact us in order to have one generated.
Should you have any questions about a particular product’s return policy we’re here to help. Please contact us and we will respond within 24 hours.
As stated in the Product Quality Guarantee, any item that arrives in less than perfect condition or missing parts will be handled at no extra cost. Refunds will be issued to the original credit card that you use when placing your order.
It is the customers' responsibility to confirm the product will comply with their state, county or city codes. If you will be receiving an inspection by a county or city inspector, please ask them what they require.